Insulation removal in Bryan TX - a clean attic before anything new goes in
Wet, moldy or pest-filled insulation in your attic? We clear it out so the new insulation starts on a clean, sealed attic.
When does old insulation need to come out?
Insulation removal in Bryan, TX clears out old insulation that's been soaked, grown mold, burned or filled with pest mess, so new insulation goes onto a clean attic and we can get at the gaps that need sealing.
At Professional Bryan Insulation Services, we're based in Bryan and work in College Station, Navasota and the cities around them, and I'm still the one who goes up and looks. Most people call because a room upstairs won't cool down or the power bill keeps climbing, and once I'm in the attic the old stuff is matted, stained or full of droppings, which means it has to come out before any new attic insulation goes in. The price and the schedule mostly turn on how big your attic is, how hard it is to move around in, how much material is up there and whether any of it is hazardous, because that changes how it's handled and hauled off. You'll get your own figure in a written estimate after I've seen the space.
What happens after you call us about old insulation?
Call or send the form
Call (979) 393-7011 or fill out the form on this page, and most of the time it's me who calls you back. We set a time for me to come look at the attic, walls or crawl space.
I look at the space myself
I go up and tell you what I see, including anything that has to be fixed before we start, like a leak, a pest entry point or something that looks like vermiculite. Then you get a written estimate, so you see the cost before you decide anything.
We take care of permits
If the job needs a permit, we apply for it and handle the inspections, and in Bryan that runs through the city's online system for contractors who register with the city every year. If you're not sure whether yours needs one, I'll find out before we start.
My crew works with me there
My crew does the removal and the new install with me on site. Before we pack up, I go over the finished attic with you.
How we handle insulation removal
We start by covering the path from your door to the attic hatch, since everything we pull out comes back through the house. Then we take out the insulation that's wet, moldy, fire damaged or full of pest mess, bag it and haul it off, because new material laid over that just buries the problem. With the attic bare, I show you what caused the damage so it gets fixed first, and we seal the gaps around can lights, pipes and the hatch so the new insulation isn't fighting a draft. When it goes back in, we keep the eave vents clear so the attic can still breathe. If I see anything that looks like vermiculite, we leave it alone until it's tested, and asbestos work goes to a separate company trained for it. We're fully licensed and insured for the work we take on.
Removal isn't always just an attic job. When water or pests got under the house too, the old batts below the floor often have to come out, and we put back crawl space insulation once the space is dry and clean. Walls opened up after a leak or during a remodel are another place we pull soggy material and replace it with new wall insulation.
Get a written estimate for clearing out your old insulation
We reply within one business day, and most of the time it's me calling you back to set up a visit. I look at the space myself and give you a written estimate that's free, on site and comes with no pressure to book.
Questions about insulation removal in Bryan
How much does attic insulation removal cost in Bryan, TX?
Across the US, attic insulation removal usually costs about $600 to $3,600 per job, and that's what the market charges, not a quote from us. Hauling off the old material is usually part of that price, though that can change when it's hazardous, like insulation with mold, pest waste or asbestos in it.
How long does insulation removal take?
Removal takes anywhere from 4 hours to 2 days or more, depending on how big the attic is and how complicated the job is. If your attic is large or hard to get around in, plan for the longer end.
What should I do if my attic has vermiculite insulation?
Leave it alone, because the EPA recommends not disturbing vermiculite since it can release asbestos fibers you could breathe in. It's a loose, pebbly fill, usually gray-brown or silver-gold, and the EPA's vermiculite guidance shows what to look for. Anyone doing other work up there can stir it and leave fibers in other parts of the house. If you choose removal, the EPA recommends a trained, accredited asbestos abatement contractor separate from whoever checked the insulation.
Who can be near the work area during asbestos removal?
Nobody in your household, pets included, should go into the work area until the asbestos work is done. The abatement contractor marks the area as a hazard, seals it off with plastic sheeting and duct tape and turns off the heating and air conditioning. Before they start, ask whether the workers handling the asbestos are trained and accredited, as the EPA advises.
How do I get my attic ready for insulation removal?
Clear out the boxes, old furniture and junk stored up there before the crew comes, because the less there is to move, the fewer labor hours go into getting ready to pull insulation. If something's too heavy or awkward to get down, tell me when I come out so it's in the plan.
Can asbestos insulation be sealed instead of removed?
Yes, repairing asbestos material usually means sealing or covering it, and with any kind of repair the asbestos stays where it is. Either way, it's work for a company trained in asbestos, and in Texas anyone doing asbestos work in a public building has to be licensed or registered by the Department of State Health Services.
Other work that often comes with removal
Crawl space insulation
Pests and moisture rarely stop at the attic, so the space under your floors can need the same clean-out and fresh insulation.
Wall insulation
When a leak or a remodel already has a wall open, that's the easiest time to swap out wet or thin insulation inside it.
Call before new insulation goes in
Call (979) 393-7011 or use the form, and have the rough size of your attic and any signs of water, mold, scorch marks or droppings ready so the first visit covers what matters.